477
Wireless Communication Function Notes
Cautions for Using Multiple Cameras
z
When connecting multiple cameras to one access point via Wi-Fi, make
sure the cameras’ IP addresses are different.
z
When multiple cameras are connected to one access point via Wi-Fi, the
transmission rate drops.
z
When there are multiple IEEE 802.11b/g/n (2.4 GHz band) access points,
leave a gap of ve channels between each Wi-Fi channel to reduce radio
wave interference. For example, use channels 1, 6, and 11, channels 2
and 7, or channels 3 and 8.
Using the Wireless Remote Control BR-E1
z
BR-E1 cannot be used while the camera and smartphone are paired via
Bluetooth. Change the camera connection to the wireless remote control
in [
K
Connect to Wireless Remote] under [
k
: Wi-Fi/Bluetooth
connection].
To Next Page
Loading...
