2.
Set the desired minimum shutter speed.
Auto
If you select [Auto], turn the < > dial to set the difference relative
to standard speed (toward Slower or Faster), then press < >.
Manual
If you select [Manual], turn the < > dial to select the shutter speed,
then press < >.
Caution
If a correct exposure cannot be obtained with the maximum ISO speed limit set
with [Auto range], a shutter speed slower than the [Min. shutter spd.] will be set
to obtain the standard exposure.
This function will not be applied to flash photography.
Note
When [Auto(Standard)] is set, the minimum shutter speed will be the reciprocal of
the lens focal length. A single step from [Slower] to [Faster] is equivalent to a
single stop of the shutter speed.
150
To Next Page
Loading...
