Turning on the Power
Setting the Date, Time, and Time Zone
Changing the Interface Language
Automatic Sensor Cleaning
Battery Level Indicator
< >
The camera turns on in PHOTO mode.
< >
The camera is turned off and does not function. Set the power switch to this position
when not using the camera.
Note
If you set the power switch to < > while an image is being recorded to the
card, [Saving...] will be displayed and the power will turn off after the recording
finishes.
Setting the Date, Time, and Time Zone
If you turn on the camera and the date/time/zone setting screen appears, see Date/Time/
Zone to set the date/time/zone.
55
To Next Page
Loading...
