Responding to Error Messages
When an error occurs, display the details of the error by following one of the procedures
below. Then, eliminate the cause of the error by referring to the examples shown in this
chapter.
On the [View info] screen, press < >.
Select [Error details] on the [Wi-Fi on].
Click the following error numbers to jump to the corresponding section.
11 12
21 22 23
41 43 44 45 46 47 48
61 63 64 65 66 67 68 69
91
121 125 126 127
151 152
Note
When an error occurs, [Err**] is displayed in the upper right of the [Wi-Fi/
Bluetooth connection] screen. It disappears when the camera's power is set to
< >.
590
To Next Page
Loading...
