Canon EOS Rebel T5 - Shoot by Lighting or Scene Type

77
In the <2>, <3>, <4>, and <5> Basic Zone modes, you can shoot
with settings that match the lighting or scene type. Normally, [Default
setting] is adequate, but if the settings match the lighting condition or
scene type, the picture will look more accurate to your eyes.
For Live View shooting, if you set both [Light/scene-based shots] and
[Ambience-based shots] (p.73), setting [Light/scene-based shots] at
first is recommended. This will make it easier to see the resulting effect
on the LCD monitor.
1
Set the Mode Dial to any of the
following modes: <2>, <3>,
<4>, or <5>.
2
Display the Live View image.
Press the <A> button to display the
Live View image.
Shoot by Lighting or Scene Type
Lighting or Scene
A 7 C 2 3 4 5 6
(1) Default setting
k k k k
(2) Daylight
k k k k
(3) Shade
k k k k
(4) Cloudy
k k k k
(5) Tungsten light
k k k
(6) Fluorescent light
k k k
(7) Sunset
k k k k