Canon imageCLASS MF756Cx - Initial Physical Setup; Check Included Items; Remove Packing Materials; Position the Machine

2
En
Vi
Th
Ms
Unless otherwise stated, illustrations used in this
document are for the MF756Cx
Checking the Items
Included
x 4
* May not be included with some models.
*
*
Removing the Packing
Material
1. Install the machine in the location where it
will be used.
The machine should be carried by at least two
people.
2. Remove all packing material.
Remove all of the tape.
Do not remove the sticker that covers the USB port
until you actually use the USB port.
Rear
1
2
1 2 3 4 5 6 7 12