Printing at full size
9. In the C Media T ype list, select the type of paper that is loaded. In this case, click Heavyweight
Coated Paper .
10. Select the print target in the F Print T arget list.
1 1. Access the Finishing pane.
12. Click Roll Paper in the A Media Source list.
13. Conrm that the roll paper width matches the paper size.
Make sure the width of the loaded roll is displayed in the B Roll Paper W idth list-in this case, 10
in. (254.0mm) .
Note
• If the width of the loaded roll is not displayed in B Roll Paper W idth , click L Printer on the Main
pane and update the printer information.
320 Enhanced Printing Options
To Next Page
Loading...
