Chapter 7
7-3
First Level Second Level Third Level Fourth Level Fifth Level Sixth Level
ADJUST PRINT PATTERN NOZZLE 1 : Press the [OK] button to
execute
OPTICAL AXIS : Press the [OK] button to
execute
LF TUNING
LF TUNIG 2
HEAD ADJ. MANUAL HEAD ADJ EXTENSION : Press the [OK] button to
execute
DETAIL : Press the [OK] button to
execute
BASIC : Press the [OK] button to
execute
ADJ. SETTING A A-1 : Adjustment value entry
---
A-96 : Adjustment value entry
---
F F-1 : Adjustment value entry
F-2 : Adjustment value entry
SAVE SETTINGS YES/NO
RESET SETTINGS YES/NO
NOZZLE CHECK POS. YES/NO
GAP CALIB. YES/NO
CHANGE LF TYPE 0/1
ROUGH EXCUTE YES/NO
AUTO REG EXCUTE YES/NO
CR REG EXCUTE YES/NO
RESET YES/NO
CR MOTOR COG YES/NO
MARGIN ADJ TOP MARGIN ADJ -2.0 to 2.0
BTM MARGIN ADJ -2.0 to 2.0
PRINT PATTERN YES/NO
To Next Page
Loading...
