*5: Not displayed if NetWare is Off.
*6: Not displayed if Auto Detect is On.
*7: Follows the setting in Date Format.
*8: Viewing and configuration is possible for administrators, and only viewing for other users.
*9: Viewing and configuration is possible for administrators only.
*10: Not displayed if IPv6 Support is Off.
*11: Default setting for the time to enter the power save mode/Sleep mode is recommended.
*12: Displayed only when the Media Take-up Unit is attached.
*13: Available if: (a) Use Take-up Reel is Enable, (b) roll paper is loaded, and (c) you have not executed Auto Feed for the loaded roll.
*14: Available when Use Take-up Reel is Enable.
*15: Displayed as the menu during printing while printing is in progress.
*16: Not displayed in the regular menu.
Menu Structure
iPF8400
User's Guide
Control Panel Printer Menu
672
To Next Page
Loading...
