Handling rolls
10. Press the OK button.
After the roll is rewound, it stops automatically .
Paper cutting (to have the roll cut at your specied position)
1. Press the Feed button.
2. Press the ▼ button to advance the roll to the position for cutting.
3. Press the Cut button.
4. Press ▲ or ▼ to select Y es , and then press the OK button.
After the roll paper is cut, it is rewound automatically .
Caution
• If paper would be short when cut at a particular position, the roll may automatically be advanced in
some cases before cutting.
132 Handling Paper
To Next Page
Loading...
