This machine provides an energy saver function. When no operations are performed for a specified
number of minutes, the machine automatically enters the energy saver mode.
Z_ NOTE
• The tittle until the rrlachir_e enters the energy saver mode can be specified in a range of 3 minutes to 30 mir}utes.
You can also turn off the energy saver function. For details on the energy saver mode settings, see <4. ENERG Y
SAVER> of "Menu Descriptions," on p. 10-5.
• The energy saver function does not activate when the rr_achine is in the following conditions:
- Whenpdntingoutcopies, faxes*oro#lerpages
- Whensendingorreceivingfaxes*
- When scanning
- Whi_eac_gyj_b_ssavedinthemem_ry_rwhen_eco_latecopy_r_therfunctionsareoperating_ orwhenthe
In Use/Memory indicator lights up
- Whenpaperjamsoccur
- When an error message appears and the Alarm indicator flashes
- Whennopaperisloadedinthecasse#e
- When paper is loaded in the multi-purpose feeder
- Whenthemessage<TONERSUPPLYLOW>appears*
• The machine will be restored from the energy saver mode in the following conditions:
- Whenreceivingprintjobsfrornyourcor_#uter
- When receiving faxes*
- Whenyoupickupthehandsetofthetelephoneconnectedtothemachine*
- WhenreceMngacall*
*Only for the MF5750/MF5770 rrl')dels.
Setting the Energy Saver Mode Manually
1 Press [Energy Saver].
The LCD is turned off and the Energy Saver key lights up.
Z_ NOTE
Right after the machine is restored from the energy saver mode. wait about 15 seconds, or dght after copying
finishes, wait about 2 seconds before pressing [Energy Saver_
Restoring from the Energy Saver Mode Manually
1 Press [Energy Saver].
The Energy Saver key goes off and the machine enters the standby mode.
z_ NOTE
The rrlachirle can be restored frorrl ttle energy saver rr}ode immediately t¢)wever, it may vary according to room
temperature and circumstances.
I
._o
©
E
1-7
To Next Page
Loading...
