03
C
"l-
EL
While holding the lock release lever on the paper guide at the rear of the cassette, slide the paper guide to
the mark Indicating the desired paper size.
O IMPORTANT
If the paper guide is not adjusted correctly for the size of the paper, the quali_y of your printouts may be adversely
affected.
3 Fan the paper st_ck first, then tap the edges on a flat surface to even the stack.
4 Load the paper stack In the cassette with the print side down.
When you load paper with a logo on, position the paper with the print side down (logo side) and load it so that the
top of the paper feeds first in the cassette.
2-4
To Next Page
Loading...
