5 While holding the lock release lever on the paper guide on the left side of the cassette, slide the paper
guide to the mark indicating the desired paper size.
The paper guides on the sides of the cassette move together.
Make sure the paper stack does not exceed the load limit mark (A) and it is loaded under the hooks (B) on the
paper guides.
IMPORTANT
• Do not load different size and type of paper at ttle same time.
• Do not load extra paper when there is still paper left in ttle cassette.
If you load extra paper while making copies, rerrlove the loaded paper first.
Then put it together with the extra paper and tap the edges. A#er that, reload it in the cassette.
6 Insert the cassette Into the machine.
_ NOTE
If you do not completely insert the cassette into the machine, paper jafr_s may occu_
7 Specify the size and the type of the paper you load.
For details on how to specify the paper size and type, see "Specifying the Paper Size and Type (Common for
Cassette and Multi-Purpose Feeder)," on p. 2=8.
ob
"(3
"T"
CL
0-
2-5
To Next Page
Loading...
