03
C
"l-
n
Insert the envelope square into the multi-purpose teeder with the print side up and the right edge (i.e.,
closer to the stamp) tirst.
3 specify the size and the type of the paper you load.
For details on how to specify the paper size and type, see "Specifying the Paper Size and Type (Common for
Cassette and Multi-Purpose Feeder)," on p. 2=8.
Specifying the Paper Size
At the factory, the paper size has already been set to <A4>. Each time you change the paper size you
load in the cassette or the multi-purpose feeder, it is necessary to specify the paper size according to
the following.
1 Press [Menu].
2 Press [ 4(-)] or [_(+)] to select <PAPER SETTINGS> _ press [OK].
3 Press [4(-)] or [b" (+)] to select <CASSETTE> or <MP TRAY> _ press [OK],
4 Press [_(-)] or [b" (+)] to select <PAPER SIZE> _ press [OK],
5 Press [4 (-)] or [_, (+)] to select the appropriate paper size _ press [OK],
You can select from the following paper sizes: A4, BS, AS, EXECUTIM [Executive[, COM 10", MONARCH*, DL*,
ISO-05", LTR [Letter), and LGL (Legal)*.
* Only for the multi-purpose feeder.
NOTE
Select <COM10>, <MONARCH>, <DL>, or <1S0-C5> for envelopes.
6 Press [Stop/Reset] to return to the s_ndby display.
2-8
To Next Page
Loading...
