TheAlarmindicatorcomeson.
Doesthemachinefeedpapercorrectly,oristherepaperinthecassetteormulti-purposefeeder?
Olearthep_pe,.......loadpape,nth...... _......,,-purposefeeder_For,_struc,.......
clearing paper jam, see "Clearing Jams," on p. 9-1. For instructions on loading paper, see "Loading
Paper," on p. 2=3.)
,fth......h,neh.....paper,.......paper,s,ooded,nth......tt......,thporpo_efeed......p,ug
the machine and wait approximately 3 minutes to 5 minutes, then plug it in again. If the problem is
fixed, the Alarm indicator will turn off, and the LCD will return to the standby mode. If the Alarm
indicator remains flash, unplug the machine, and contact your local authorized Canon dealer or the
Canon help line.
Printout does not match paper size.
Is the paper stack loaded and aligned correctly in the cassette, or is paper loaded in the
multi-purpose feeder correctly?
Mak ..... the paper is loaded and aligned ...... tly in th ...... tte or the paper is loaded ...... tly
in the multi-purpose feeder. (See "Loading Paper," on p. 2-3.)
03
C
O
©
The machine will not scan a document.
Did you connect the power cord to the machine just now?
Waitf .... hile. Aft .......... ring the p........ d, th ...... hi .......... t ..... d......... ts immediately.
Is the document loaded correctly?
R...... the d ......... t, stack it if ........ ry, and load it in the ADF ....... tiy. (See "Loading
Documents in the ADF," on p. 3-3.)
Mak ..... theADFisclosed.
Is the USB cable connected securely?
CheckthattheUSBcable,.........ted......,ytoth......hi......dy..........purerD,.........tthe
USB cable, and reconnect it correctly after a while.
9-16
To Next Page
Loading...
