iii} iiii iiii iii ii ii ii ii ii ii ii ii ii ii i Jii iiiiiii iii ii ii ii ii ii ii ii ii ii ii ii ii i ii}ii iiii iiii iii ii ii ii ii ii ii ii ii ii ii ii ii ii ii i iiliiliiliii
2. MP TRAY
1. PAPER SIZE Selects the paper size for the MP tray.
A4, B5, AS. EXECUTIV, COM10, MONARCH, DL.
ISO-CS, LTR. LGL
2. PAPER TYPE Selects the paper type to be used in the MP tray.
PLAIN PAPER, PLAIN PAPER L,
HEAVY PAPER. HEAVY PAPER H, TRANSPARENCY
COMMON SETTINGS
1. DEFAULT SETTINGS Selects the Copy, Scan, or Fax* mode for the machine's
default mode. When the power cord is plugged in, or
after the auto clear function activates, the standby
display of the selected mode appears.
COPY The Copy mode is selected as default.
FAX* The Fax mode is selected as default.
SCAN The Scan mode is selected as default.
2. VOLUME CONTROL Adjusts the beep or alarm volume of the machine.
1. KEYPAD VOLUME Adjusts the volume of keypad tones.
0to3(1)
2. ALARM VOLUME Adjusts the alarm volume.
0to3(1)
3. TX DONE TONE Sets the transmission end tone settings.
ERROR ONLY The transmission end tone sounds only when any error
occurs while printing.
1 to 3 (1)
OFF The transmission end tone does not sound.
ON The transmission end tone sounds.
1 to 3 (1)
03
.c:
10-2
To Next Page
Loading...
