Chapter 12 Maintenance 115
Printing The Nozzle Check Pattern
The nozzle check pattern shows whether the print head is operating properly.
NOTE
You can also print the nozzle check pattern from your computer. (See Software Guide, located on your
Setup CD-ROM)
Follow this procedure:
1 Load letter- or A4-size plain paper in the multi-purpose tray.
2 Press [Additional Functions].
3 Use [
W
] or [
X
] to select <3.MAINTENANCE>.
4 Press [Set].
5 Press [Set].
The machine prints a nozzle check pattern.
PC
USER DATA
3.MAINTENANCE
MAINTENANCE
1.NOZZLE CHECK
Nozzle check pattern
For details on confirming the nozzle check pattern,
see page 116.
Print head position
For details on confirming the print head position
pattern, see page 116.
To Next Page
Loading...
