154 Appendix Chapter 14
Menu: TX SETTINGS
UNIT NAME Enters the name printed on faxes you send. — page 86
TX TERMINAL ID Prints sender information at the top of each fax you
send.
——
TTI POSITION Selects the position of the sender information
(outside or inside the image area) when sending
black & white faxes. (Automatically set inside the
image area for color faxes.)
OUTSIDE IMAGE
INSIDE IMAGE
TEL NUMBER MARK Selects the mark to appear before the fax/
telephone number printed on faxes you send.
FAX
TEL
OFFHOOK ALARM Enables/disables the alarm that alerts you if the
handset of the telephone connected to the machine
is not hung up properly.
ON
OFF
—
VOLUME CONTROL Sets the CALLING VOLUME and LINE
MONITOR VOL.
——
CALLING VOLUME When the machine is set to ring, selects the ring
volume.
1/2/3
LINE MONITOR
VOL.
Selects the line monitor volume while dialing. 0/1/2/3
RX CALL LEVEL Selects the ring type for incoming call. HIGH
STANDARD
—
TEL LINE TYPE Selects the telephone line type setting for your
machine.
TOUCH TONE
ROTARY PULSE
page 83
ACTIVITY REPORT Enables/disables automatic printing of an
ACTIVITY REPORT after every 20 transactions.
AUTO PRINT ON
AUTO PRINT OFF
—
Name Description Settings Details
ECM TX Enables/disables Error Correction Mode (ECM)
sending.
ON
OFF
page 103
PAUSE TIME Selects the pause length when you press [Redial/
Pause].
1 to 15SEC
(2SEC)
—
AUTO REDIAL Enables/disables automatic redialing. ON
OFF
page 99
REDIAL TIMES If you select <ON>, selects the number of
redialings.
1 to 10TIMES
(2TIMES)
REDIAL
INTERVAL
If you select <ON>, selects the length of time
between redialings.
2 to 99MIN.
(2MIN.)
TX START SPEED Selects the speed at which the machine starts
transmitting.
33600bps
14400bps
9600bps
7200bps
4800bps
2400bps
—
Name Description Settings Details
To Next Page
Loading...
