Chapter 14 Appendix 155
Menu: RX SETTINGS
TX REPORT Enables/disables automatic printing of a
transmission report after sending.
PRINT ERROR ONLY
OUTPUT YES
OUTPUT NO
—
REPORT WITH TX
IMAGE
If you select <PRINT ERROR ONLY> or
<OUTPUT YES>, selects whether the first page of
the fax is printed under the report (black & white
faxes only).
ON
OFF
Name Description Settings Details
ECM RX Enables/disables Error Correction Mode (ECM)
during reception.
ON
OFF
page 103
FAX/TEL AUTO SW If you select <FAX/TEL AUTO SW> as the
receive mode, customizes its settings.
——
RING START TIME Selects the time the machine takes to check
whether a call is a fax or voice call.
0 to 30SEC (8SEC)
F/T RING TIME Selects the ring length for voice calls. 10 to 45SEC
(15SEC)
F/T SWITCH
ACTION
Selects whether the machine switches to receive
mode after the ring time has elapsed, or whether it
disconnects the call.
RECEIVE
DISCONNECT
DRPD:SELECT FAX If you select <DRPD> as the receive mode, select
the ring pattern for the machine.
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
NORMAL RING
—
INCOMING RING If you select <FAX/TEL AUTO SW>, <DRPD> or
<FAX ONLY MODE> as the receive mode,
enables/disables ringing for fax calls. (A telephone
must be connected to your machine for ringing to
occur.)
OFF
ON
—
RING COUNT If you select <ON>, selects the number of rings for
fax calls.
1 to 99TIMES
(2TIMES)
MAN/AUTO SWITCH If you select <MANUAL MODE> as the receive
mode, selects whether the machine switches to fax
receive mode after ringing for a specified length of
time.
OFF
ON
—
F/T RING TIME If you select <ON>, selects the length of time the
machine rings before switching to fax receive
mode.
5 to 99SEC
(15SEC)
REMOTE RX Enables/disables remote receiving. ON
OFF
—
REMOTE RX ID If you select <ON>, selects the remote receiving
ID.
00 to 99
(25)
Name Description Settings Details
To Next Page
Loading...
