Chapter 2 Document And Paper Handling 19
X Loading Documents
To copy, fax, or scan a document, set it on the platen glass.
NOTE
Make sure any glue, ink, or correction fluid on the document is completely dry before loading.
1 Lift the document cover.
2 Load your document on the platen glass.
• Place your document face down on the platen glass.
• Align the upper left corner of your document with
the alignment mark on the lower right corner of the
platen glass.
NOTE
The machine cannot scan the area within
approximately 1/8 in. (3 mm) of the front and right
edges of the platen glass.
3 Gently close the document cover.
NOTE
Thick documents (Max. 3/4 in./20 mm), such as
books, can also be scanned.
To Next Page
Loading...
