Canon PIXMA MX320 User Manual

A
dvanced Guide
>
Troubleshooting
>
Problems with Scanning > Error Message Appears and the ScanGear (Scanner
Driver) Screen Does Not Appear
Error Message Appears and the ScanGear (Scanner Driver)
Screen Does Not Appear
Check 1: Make sure that the machine is turned on.
Check 2: Connect the USB cable to a different USB port on the computer.
Check 3: If the USB cable is connected to a hub, remove it from the hub
and connect it to a USB port on the computer.
Check 4: Make sure that the MP Drivers are installed.
If it is not installed, insert the
Setup CD-ROM
into the computer's disc drive, then select Custom Install
and install MP Drivers.
Check 5: On the File menu of the application, select Select Source and
select the machine.
Note
The operation may differ depending on the application.
Check 6: Make sure that the application is TWAIN-compliant.
You cannot open ScanGear (scanner driver) from applications not supporting TWAIN.
Check 7: Exit ScanGear (scanner driver) if it is running on another
application.
Page top
Page 756 of 817 pagesError Message Appears and the ScanGear (Scanner Driver) Screen Does N...

Canon PIXMA MX320 Specifications

General

Print Technology	Inkjet
Print Resolution	4800 x 1200 dpi
Scanner Resolution	1200 x 2400 dpi
Fax Modem Speed	33.6 Kbps
Connectivity	USB 2.0
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder (ADF)	Yes
ADF Capacity	30 sheets
Print Speed (Black)	7.5 ipm
Print Speed (Color)	4.5 ipm
Scanner Type	Flatbed
Paper Sizes	Letter, Legal, A4, A5, B5, Envelopes
Ink Cartridges	PG-210 Black, CL-211 Color
Display	LCD
Paper Handling	Rear Tray: 100 sheets