EasyManuals Logo

Canon PIXMA MX432 series User Manual

Canon PIXMA MX432 series
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Canon 30-241 Ink Cartridge Reset Pixma iP/MP/MX/MG Series
The following procedures may be used to reset the Canon printer ink level monitoring
following the installation of a refilled Canon 30, 31, 40, 41, 50, 51, 210, 211, 240, or 241
integrated ink cartridge. In most cases, the error/alert will need to be cleared to enable
printing. Ink waste container reset procedures are also provided below.
NOTE: for multi-cartridge installation, the procedure(s) may need to be repeated twice.
A. Pixma iP/MP/MX/MG Ink Counter Reset* (UNIVERSAL RESET Procedure #1)
a. At computer screen message, select ‘Stop’/’Reset’, ‘OK’, or ‘Resume’,
or….
b. Select ‘Stop’/’Reset’, ‘OK’ or the ‘Resume’ button (triangle-circle icon) on your printer for 5
seconds.
Printing may continue under the ‘ink out’ condition.
B. Pixma iP Ink Counter Reset** (Procedure #2)
a. Press and Hold the Resume (triangle-circle) button
b. Press and Hold the Power Button; hold both buttons for 5 seconds
c. Release the Resume (triangle-circle) button.
d. Press the Resume button 5 times.
e. Release the Power button. The blinking ink level/power light should go steady after a few
seconds.
Printing may continue under the ‘ink out’ condition.
C. Pixma MP/MX/MG Series: General Printer & Ink Counter Reset*** (Procedure #3.a)
a. Press the power button to turn off the printer.
b. Hold the "Stop/Reset" button while pushing the power button. While still holding down the
power button, release the "Stop/Reset" button and then push it twice in a row.
c. Wait approximately 20 to 30 seconds until the LED shows 0.
d. Push the "Stop/Reset" button four (4) times in a row.
e. Push the power button twice.
f. Turn off the printer by pushing the power button one more time. The printer is now reset.
Next, reset the cartridge ink counter:
a. Unplug the power and the USB cables from the printer.
b. Open the cartridge door and hold down the power button.

Other manuals for Canon PIXMA MX432 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon PIXMA MX432 series and is the answer not in the manual?

Canon PIXMA MX432 series Specifications

General IconGeneral
Print TechnologyInkjet
Print ResolutionUp to 4800 x 1200 dpi
ConnectivityUSB, Wi-Fi
Automatic Document FeederYes
Duplex PrintingManual
FunctionsPrint, Copy, Scan, Fax
Wireless PrintingYes
Mobile PrintingYes
Input Capacity100 sheets
Weight18.7 lbs
Scanner TypeFlatbed and ADF
Scanner Resolution1200 x 2400 dpi
Operating System SupportWindows, Mac
Print Speed (Black)Approx. 9.7 ipm
Print Speed (Color)Approx. 5.5 ipm
Paper Sizes4 x 6, 5 x 7, 8 x 10, Letter, Legal, Envelope
Fax Speed (Black)Approx. 3 sec. (black)
DisplayLCD
Ink CartridgesPG-240 Black, CL-241 Color
Dimensions18.1 (W) x 15.2 (D) x 7.9 (H) inches

Related product manuals