Canon PIXMA TS5300 Series User Manual

7. Perform/change settings.
You can switch the screen between IPv4 and IPv6. Click the tab to switch the protocol.
• IPv4 settings
A: Use IPv4 address
Always selected. (displayed in a gray out state)
B: Get IP address automatically
Select this option to use an IP address automatically assigned by a DHCP server. DHCP
server functionality must be enabled on your router.
C: Use next IP address
Select this option if no DHCP server functionality is available in your setup where you use the
printer, or you want to use a fixed IP address.
Enter the IP address, subnet mask, and default gateway.
• IPv6 settings
Note
• If you select a USB connected printer on step 4, you cannot perform IPv6 settings depending
on the printer you are using.
For details, see List of Models Which Does Not Support IPv6 Configuration via USB
Connection.
67

Canon PIXMA TS5300 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 1200 dpi
Scanner Resolution	1200 x 2400 dpi
Connectivity	Wi-Fi, USB
Supported Paper Sizes	A4, A5, B5, LTR, LGL, Envelopes (DL, COM10)
Functions	Print, Copy, Scan
Scanner Type	Flatbed
Interface Type	USB, Wi-Fi
Mobile Printing	AirPrint, Mopria
Paper Types	Plain Paper, Photo paper, Envelopes, Matte Photo Paper
Maximum Paper Input	100 sheets