EasyManuals Logo

Canon PowerShot SX160 IS Getting Started Guide

Canon PowerShot SX160 IS
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CaHOH
"Power hot SXIGO iS
CDP-E494-010 @CANON INC. 2012
Getting Started
* Before use, be sure to read this guide.
* Reading this guide will help you learn to use the camera properly.
* Store this guide safely so that you can use it in the future.
Before use, make sure the following items are included in the
package, if anything is missing, contact your camera dealer.
_Camera
®AAAIkaNne Batteries (x2)
®Wrist Strap WS-800
®interface Cable IFC-400PCU
®DiGiTAL CAMERA Solution Disk ®Getting Started (this guide)
* Power cord also included.
install PDF manuals and software from the included DiGiTAL
CAMERA Solution Disk. Note that Adobe Reader is required to view
the PDF manuals.
* insert the included DiGiTAL CAMERA Solution Disk in the
computer's CD-ROM drive and follow the installation instructions.
* After installation, you can access the Camera User Guide by
double-cNcking the desktop shortcut icon.
* For software instructions, refer to the Camera User Guide or the
ImageBrowser EX Help.
The following memory cards (sold separately) can be used,
regardless of capacity.
SD memory cards* SDXC memory cards*,S',_ "
SDHC memory cards* Eye-Fi cards .,,_r_-
Conforms to SD specifications. However, not aN memory cards have been
verified to work with the camera.
AhnHt Fy_-Fi C:ard__
This product is not guaranteed to support Eye-Fi card functions
(including wireless transfer), in case of an issue with an Eye-Fi card,
please check with the card manufacturer. Also note that an approval
is required to use Eye-Fi cards in many countries or regions. Without
approval, use of the card is not permitted, if it is unclear whether the
card has been approved for use in the area, please check with the
card manufacturer.
/,,ffOpen the cover.
Slide the switch (_) and open the cover (@).
/,,j insert the batteries. ,_'/
insert the batteries as shown.
J Check the card's write-protect tab and _/
_,, insert the memory card. ,l
Shooting is not possible with cards that have a write-protect tab
(_) in the locked position. Slide the tab up until it clicks into the
unlocked position.
insert the memory card with the label (®) facing as shown until
the lock clicks shut.
To remove the memory card, push it in until you feel a click, and
then slowly release it.
Close the cover.
Lower the cover (_) and hold it down as you slide it, until it
clicks into the closed position (®).
_Turn the camera on. _/,/_
Press the power button to turn the camera on. The [Date/Time]
screen is displayed.
J Set the date and time. 'i/
L
Press the <4><_> buttons to choose an option, and then adjust
the setting, either by pressing the <,_><_> buttons or turning
the <,;_> dial.
/,,_dSpecify your home time zone. ,,
Press the <4><)'> buttons or turn the <_i_;> dial to choose your
home time zone.
Press the <@> button when finished. After a confirmation
message, the setting screen is no longer displayed.
1 Press the <MENU> button.
2 Move the zoom lever to choose the [_'T] tab.
3 Press the <A><v> buttons or turn the <_:_;> dial to choose [Date/
Time], and then press the <@> button.
4 Follow step 4-2 to configure the setting, and then press the <MENU>
button.
®
® ®
® ®
@
@
@
@
@
@
@
@
@
@
Press the <FCq>button.
Press and hold the <@> button, and then immediately press
the <MENU> button.
Press the <_><v><l><_> buttons or turn the <_,:i)> dial to
choose a language, and then press the <@> button.
Press the power button and set the mode dial to <_)>.
/f Compose the shot.
To zoom in and enlarge the subject, move the zoom lever
toward <E_> (telephoto) as you watch the screen, and to zoom
away from the subject, move it toward <_7_> (wide angle).
_ Shoot still images.
/ ;
Press the shutter button lightly ((#).
The camera beeps twice after focusing, and AF frames are
displayed to indicate image areas in focus. Press the shutter
button all the way down (@_).
f Shoot movies,
Press the movie button to start shooting, and press it again to
stop.
/iJ Enter Playback mode.
Press the <[]_> button.
To view the previous or next image, press the <_><)'> buttons
or turn the <@> dial.
Movies are identified by a [_] icon. To play movies, go to
step 7-3.
/,i_ Play movies.
Press the <@> button to access the movie control panel,
choose [_,] (either press the <4><)'> buttons or turn the <_ii_>
dial), and then press the <@> button again.
Movie playback begins, and you can adjust the volume as
needed by pressing the <A><v> buttons.
After the movie is finished, [_] is displayed.
_ Erase the images.
1 Press the <_> button.
2 After [Erase?] is displayed, press the <_><_> buttons or turn the
<_i_;> dial to choose [Erase], and then press the <@> button.
-]
);o ,

Other manuals for Canon PowerShot SX160 IS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon PowerShot SX160 IS and is the answer not in the manual?

Canon PowerShot SX160 IS Specifications

General IconGeneral
SensorCCD
Sensor Size1/2.3 inch
Optical Zoom16x
Digital Zoom4x
Aperture Rangef/3.5 (W) - f/5.9 (T)
Image ProcessorDIGIC 4
ISO Range100-1600
LCD Size3.0 inch
LCD Resolution230, 000 dots
Storage MediaSD/SDHC/SDXC
Shutter Speed15-1/3200 sec
Image StabilizationOptical
Video Resolution1280 x 720 (720p)
Battery TypeAA (Alkaline or Ni-MH)
Dimensions111.0 x 72.5 x 44.1 mm
Weight291 g (including batteries)
Focal Length5.0 – 80.0 mm (35 mm equivalent: 28 – 448 mm)

Related product manuals