17
Preparing the Camera, Basic Functions
Viewfinder (p. 38)
CF Card Slot Cover (p. 24)
Battery Cover
(p. 20)
LCD Monitor*
3
(p. 33)
Attaching the wrist
strap*
1
Tripod Socket
Battery Cover Lock (p. 20)
*
1
Be careful not to wave the camera about or catch it on other items
when dangling it from the wrist strap.
*
2
To connect the camera to a computer or printer, use one of the
following cables.
• Computer: USB Interface Cable IFC-300PCU (supplied with this
camera)
• Direct Print Compatible Printer (CP series, optional): Direct
Interface Cable DIF-100 (supplied with Direct Print compatible
printers)
• Bubble Jet Printer with the direct print function (optional): Please
refer to the Bubble Jet Printer user guide.
Please refer to your
System Map
to find out which direct print function
compatible printer can be used with this camera.
*
3
The LCD monitor is covered with a thin plastic sheet for protection
against scratches during shipment. Remove it before using the
camera.
Strap Mount
To Next Page
Loading...
