Canon varioPRINT 140 Series - Print a Scheduled Job Later

Print a Scheduled Job Later
Introduction
The machine prints the jobs that are present in the list of [Scheduled jobs] jobs.
However, you can decide to print a job later, for example because:
• The required media are out of stock, or
• You first want to make a proof.
Then you must move the job back to the list of [Waiting jobs].
NOTE
To select the active print job
you must first press the Stop button 2x to stop the job.
Procedure
1.
On the control panel, touch [Jobs] -> [Queues].
2.
If collapsed, first touch
to expand the list of [Scheduled jobs].
3.
Touch the job or jobs you want to print later or use the [Select] button to make a selection.
To undo the multiple selection and only select one job, you must touch and hold that job for two
seconds.
4.
Press [Move to waiting jobs].
The job is moved to the list of [Waiting jobs].
Print a Scheduled Job Later
150 Chapter 7 - Plan the jobs
Canon varioPRINT 140 series