Canon varioPRINT 140 Series - Create a New Docbox

Create a new DocBox
Introduction
Follow the instructions to create a new DocBox.
NOTE
Only the System Administrator is allowed to create a new DocBox in the Settings Editor.
Procedure
1. Open the Settings Editor and go to: [Workflow]→[DocBox]
[DocBox] tab
2. Click [Add]
[DocBox] menu
NOTE
Log in as System Administrator.
3. Enter the [Name of DocBox folder].
NOTE
Identical DocBox names are not allowed.
4. If you want to secure the new DocBox with a PIN, check the [PIN enabled] checkbox and enter
a PIN to secure the DocBox.
5. Confirm the PIN.
6. Click [OK].
Create a new DocBox
162 Chapter 7 - Plan the jobs
Canon varioPRINT 140 series