Printer Only Configuration
Introduction
Next to the configurations mentioned in section
Main hardware parts
on page 18, the varioPRINT
140 series also has a printer only version. The printer only version cannot copy and scan.
The printer only configuration is a varioPRINT 140 series product that doesn't have an ADF.
Instead of the ADF the varioPRINT 140 series product has a cover. The glass plate and the
corresponding scanner are still present. You can use the glass plate for service purposes and for
media registration. You perform the media registration on a printer only configuration in the
same way as on a configuration with an ADF.
The copy and scan mode are not available on the control panel, which disables the use of the
scanner to carry out copy and scan jobs.
Printer Only Configuration
Chapter 2 - Explore the print system 21
Canon varioPRINT 140 series
To Next Page
Loading...
