Canon varioPRINT 140 Series - Change the Print Job Settings on Page Level

Change the print job settings on page level
Introduction
You can change settings of a job on page level via the [Page programming] in the job properties.
Procedure
1.
On the control panel, touch [Jobs] -> [Queues] -> [Scheduled jobs] or [Waiting jobs], or select a
DocBox.
2.
Touch the job you want to change.
3.
Touch [Edit], or double-tap the job to open the [Edit] window.
4.
If you want to carry out extended page programming, touch [Page programming].
5.
Change the required settings. Press [Ready].
6.
Press [OK].
Change the print job settings on page level
Chapter 8 - Carry out print jobs 211
Canon varioPRINT 140 series