Canon varioPRINT 140 Series - Define the General Transaction Printing Settings

Define the general transaction printing settings
You can set a number of transaction printing settings.
1. Open the Settings Editor and go to: [Transaction printing]→[Settings].
[Settings] tab
2. Go to the [General] and [Configuration] sections.
[General] and [Configuration] sections
3. Use the [Go online at startup] setting if you want the printer to stay online after a reboot or
restart.
NOTE
If the printer is offline before a reboot or restart, the printer status will not change.
4. Use the [Remote diagnostics protocol] setting to enable the remote diagnostics protocol.
5. Use the [IPDS port] setting to set the IPDS port if applicable.
6. Use the [PCL port] setting to set the PCL port if applicable.
7. You can import or export SRA configuration files on request of your Service organisation.
Click [Import] or [Export] in the [Configuration file (zip)] fields.
IMPORTANT
Only use these settings on request of your Service organisation. Otherwise, you
can damage the printer.
Define the general transaction printing settings
Chapter 8 - Carry out print jobs 251
Canon varioPRINT 140 series