Troubleshooting
When Then
You turn the printer on while the removable
hard disk is not inserted
The printer operator panel displays an error
message.
• Press the On/Off button behind the printer
operator panel for approximately 5 seconds.
The printer will shut down.
• Insert the correct hard disk for this printer.
• Press the On/Off button to turn on the print-
er.
You turn the printer on while the hard disk of a
different printer is inserted
Troubleshooting
NOTE
Do not insert other hard disks or hard disks without the correct varioPRINT 140 series software.
The printer will not function correctly.
Troubleshooting
Chapter 2 - Explore the print system 35
Canon varioPRINT 140 series
To Next Page
Loading...
