Canon varioPRINT 140 Series - Media Registration: Frequently Asked Questions

Media Registration: Frequently Asked Questions
Introduction
In this section you find answers to some frequently asked questions regarding media registration.
Question Answer
What should you do after a software
update?
After a service technician upgraded the software you
must verify the media registration. You can print the ver-
ification chart to verify if the media registration is opti-
mal (see Print the Verification Chart for Media Registra-
tion
on page 399).
What should you do after you copied
the media catalog?
When you copy the media catalogue from one printer to
another printer you must verify the media registration.
You can print the verification chart to verify if the media
registration is optimal (see Print the Verification Chart
for Media Registration
on page 399). The media registra-
tion depends on the printer and on the media.
How do you perform a media regis-
tration for temporary media?
You cannot perform media specific registration for tem-
porary media. First add the temporary media to the me-
dia catalog. Next, perform the media registration for the
selected media.
How do you perform a media regis-
tration of 1-sided media? Examples
of 1-sided media are tab sheets and
transparency media with paper back-
ing.
You must perform a manual media registration. You
cannot perform the automatic adjustment for media that
you can only print 1-sided, because the adjustment pro-
cedure prints 2-sided registration sheets.
You cannot print the verification chart for 1-sided media
because the verification chart is 2-sided. Use your own
job to determine the required values and to verify the
media registration.
Media Registration: Frequently Asked Questions
Chapter 13 - Media handling 433
Canon varioPRINT 140 series