Add toner and staples
Remove the staple waste
The dashboard of the control panel indicates if the staple waste tray is full.
You find the staple waste tray in the stacker / stapler.
Location of the staple waste tray
Procedure
Action
1 Open the front cover of the stacker / stapler.
2 Pull out the staple waste tray at the bottom of
the front side of the staple unit.
3 Discard the staple waste.
CAUTION
When you discard the staple waste,
be careful not to touch the staple
waste. This can cause personal in‐
jury.
4
Add toner and staples
Chapter 14 - Maintain the print system 519
Canon varioPRINT 140 series
To Next Page
Loading...
