Canon varioPRINT 140 Series - [Workflow] Settings

[Print quality] settings Description
[Fattening] You can indicate whether [Fattening] must be on or off.
[Minimum line width] You can indicate whether the minimum line width must be main-
tained, or thinner lines can be printed.
[Enhanced color rendering] You can indicate whether the [Enhanced color rendering] must be
on or off.
[Workflow] settings
[Workflow] settings Description
[PDL type] You can indicate whether PostScript®, PCL, PDF or XPS must be
used as page description language.
[Banner pages for print
jobs], [Trailer pages for
print jobs], [Media of ban-
ner/trailer page]
Indicate if individual sets in the job output are separated by a ban-
ner page and / or a trailer page.
[Separator sheets for print
jobs], [Separator sheet af-
ter N sets], [Media of sepa-
rator sheets]
Indicate if sets or a group of sets are separated by a separator
sheet. N means the number of sets in a group.
[PDF XObject optimization] Use this section to define how XObjects are processed. [Automat-
ic]: the XObjects of a PDF/VT job are cached. [Enabled]: the XOb-
jects of every PDF job are cached. [Disabled]: the XObjects are re-
interpreted per page.
[PDF to PostScript conver-
sion]
Indicate if you want to convert PDF to PostScript instead of only
using the native PDF RIP, which is the default setting value.
[Print range], [Accounting], and [Page numbering] settings
Edit with automated workflow in job destination
92 Chapter 5 - Prepare the print system
Canon varioPRINT 140 series