To Next PageTo Next Page
Need help?Do you have a question about the Cantek JDT-65 and is the answer not in the manual?
Technical specifications for the JDT-65 and JDT-65S dovetailer models.
Lists necessary tools for assembling the dovetailer machine.
Instructions for connecting the dust hose to the machine.
Adjusting clamping cylinders for workpiece thickness and capacity.
How to adjust the air pressure for the clamping cylinders.
Pre-operation checks and connections for the dovetailer.
Safety warning regarding keeping fingers clear of clamping cylinders.
Instructions for positioning the first workpiece for cutting.
Procedure for making dovetail cuts on workpieces.
Examining and adjusting the joint fit after cuts.
Proceeding with subsequent cuts for drawer assembly.
Tip for handling non-whole inch drawer side widths.
Guidelines for lubricating the machine's components.
Detailed parts list for the D65-01A model of the dovetailer.
Continued parts list for the D65-01A dovetailer model.
Detailed parts list for the D65-02A model of the dovetailer.
Continued parts list for the D65-02A dovetailer model.
Detailed parts list for the D65-03A model of the dovetailer.
Continued parts list for the D65-03A dovetailer model.
Detailed parts list for the D65-04A model of the dovetailer.
General| Brand | Cantek |
|---|---|
| Model | JDT-65 |
| Category | Industrial Equipment |
| Language | English |
