EasyManuals Logo

Canton Sound M User Manual

Canton Sound M
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
3
43
English
Problem Possible cause Solution
Sound M
is buzzing�
1� Signal cables from the source device to the
Sound M are too long (Analog Line)�
1� Use shorter and/or higher quality signal cables�
2� Used signal cable not shielded or the shield on
the cable used is interrupted (defective)�
2� Replace the cable with a shielded
and/or higher quality cable�
3� Ground loop (hum loop) “generated”
A ground loop can occur if at least two
interconnected devices with safety plugs
(e�g� amplifier and computer) are connected to
locally separated power outlets�
3� Connect all devices connected to the Sound M
with a safety plug to a power strip (multiple socket)�
4� A non-interference suppressed consumer
(e�g� fridge) on the same electricity network�
4� For testing purposes, turn off any possible sources of interfe-
rence; have the relevant device suppressed for interference,
if the humming sound disappears, or initially connect the
source of interference to another mains phase (L1, L2 or L3)
(consult a specialist if necessary); Insert a special “sheath
current filter” (available from specialist retailers) between the
amplifier and the Sound M to eliminate the humming� Turn
the power plug round to reduce the so-called hum voltage
(particularly important
if the source device is not earthed)�
The Sound M
unintentionally switches
on�
2� This can happen when your (mobile) device is
playing system sounds such as when typing on
the keyboard, a digital source is turned on, or an
analog source is playing�
2� Change the standby function from AUTO / [AUT] to ECO /
[ECO], MANUAL / [MAN] or NETWORK / [NSB]�

Other manuals for Canton Sound M

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canton Sound M and is the answer not in the manual?

Canton Sound M Specifications

General IconGeneral
Audio decodersDTS Digital Surround, Dolby Digital
RMS rated power300 W
Audio output channels2.1 channels
Audio Return Channel (ARC)Yes
Wi-Fi-
HDMI in3
Bluetooth version5.0
HDMI ports quantity4
Number of HDMI outputs1
Connectivity technologyWired & Wireless
Woofer diameter50 mm
Tweeter diameter19 mm
Crossover frequency3000 Hz
Woofer diameter (imperial)2 \
Tweeter diameter (imperial)0.75 \
Cables includedAC, HDMI, Optical
Display typeLED
Product colorBlack
Power consumption (standby)0.4 W
Weight and Dimensions IconWeight and Dimensions
Depth100 mm
Width725 mm
Height65 mm
Soundbar weight4000 g

Related product manuals