EasyManua.ls Logo

Cantrack G01 - SMS Command List for Device Control

Cantrack G01
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
3. Command List
Default password 123456, use mobile phone to send SMS as below to tracker’s phone
number, don’t type “+” “space”. Each command must reply “ configure OK” means
succeed. Check APN website http://bigfun.tripod.co.uk/
Function
Format
SMS Command
Step 1 Set APN
Format
apn123456+space+localApn+space+ApnName
+space+ApnPassword
Eg.send SMS
apn123456 tim.br tim tim
Device Default GPS mode last 12 hours
wkmd123456+space+2
Open LBS mode last 3 days
wkmd123456+space+1
Open Real time GPS mode last 6 hours
wkmd123456+space+0
Set center number to receive alarm
centernum123456+space+user phone number
Cancel center number
centernum123456
Check device parameter status
check123456
Voice listen mode (Personal use)
monitor123456
Recover tracker Mode
tracker123456
Activate Low battery alarm
lowbat123456+space+1
Cancel Low battery
lowbat123456+space+0
Initialize factory setup (No need use)
begin123456
Set IP Port (No need use)
adminip123456+space+IP+space+port