The CANVAS Bala Corner Chair is a piece of outdoor furniture designed for domestic use, offering a comfortable seating solution with a focus on durability and ease of assembly. This manual provides comprehensive instructions for assembling, using, and maintaining the chair, ensuring a long lifespan for the product.
Function Description:
The Bala Corner Chair is a single-seat corner chair intended to be part of a larger outdoor seating arrangement or used as a standalone piece. Its design allows for flexible placement, making it suitable for various outdoor settings such as patios, decks, or gardens. The chair is designed to provide a comfortable and stylish addition to any outdoor living space, reflecting a modern aesthetic inspired by Canadian design.
Important Technical Specifications:
- Product Number: 088-0601-2
- Model Number: YD-BALAC
- Maximum Weight Limit: 250 lb (113.3 kg) per chair. This specification is crucial for user safety and to prevent damage to the chair.
- Materials: The chair features a frame and wicker parts, indicating a blend of structural integrity and aesthetic appeal. Cushions are also included, providing comfort. The frame is made of steel, which is prone to surface oxidation (rusting) if its protective coating is scratched.
- Assembly Requirements: The assembly process requires two people and specific tools: a Torque Wrench (D1) and a Hex Bit (D2), which are included in the hardware list (D1/D2/D3 tools).
- Warranty: The product comes with a 5-year limited warranty. Specifically, it offers a five (5) year warranty against defects in workmanship and materials on the frame and a one (1) year warranty for the remaining parts. This warranty covers defective products returned by the original purchaser with proof of purchase and does not cover wear, breakage due to misuse, or abuse.
- Origin: Made in China, imported by Trileaf Distribution Trifeuil Toronto, Canada.
Usage Features:
- Assembly Process: The assembly is broken down into four clear steps, starting with attaching the back panel to the arm panel, then fastening the seat panel to the arm and back panels, and finally placing the cushions.
- Step 1: Involves placing the back panel (2) on a non-abrasive surface and inserting its hook into the arm panel (1). The arm panel is then fastened to the back panel using M6x50 mm bolts (A), washers (B), and nuts (C). A critical note advises against fully tightening the bolts until the entire chair is assembled.
- Step 2: Focuses on fastening the seat panel (3) to the arm panel (1) using additional bolts (A), washers (B), and nuts (C). Again, the instruction to not fully tighten bolts until final assembly is reiterated.
- Step 3: Requires fastening the seat panel (3) to the back panel (2) with bolts (A), washers (B), and nuts (C). This step also instructs the user to secure all bolts completely using the provided wrenches (D1, D2, and D3), ensuring the chair's structural integrity.
- Step 4: Involves turning the chair upright and placing the left back cushion (4), right back cushion (5), and seat cushion (6) onto the chair.
- Securing Clips: The manual highlights the optional use of securing clips (E) to connect and secure different sections of the chair, allowing for customization based on user preference.
- Safety Instructions:
- Adult assembly and maintenance are required.
- Protective gloves are recommended due to potentially sharp edges.
- Assembly should occur on a level surface, possibly with a protective layer, to prevent damage.
- Children should always be supervised when using or around the product and never left unattended.
- The product is intended for domestic, outdoor use only.
- Fires should not be lit below or near the product.
- Periodic checking and tightening of all nuts and bolts are advised to maintain stability and safety.
- The use of furniture covers is recommended when the chair is not in use to protect it from elements.
Maintenance Features:
- Cleaning:
- Frame and Wicker Parts: These should be washed with mild soap and water, rinsed thoroughly, and dried completely. Bleach, acid, or other solvents should not be used on these parts.
- Cushions: Cushions can be surface-washed using mild soap and water or a commercial foaming upholstery cleaner. If washed, they should be rinsed well and hung to dry. Machine washing or drying is explicitly prohibited.
- Off-Season Storage: Before storing for the off-season, the chair should be cleaned and dried, then stored in a dry, sheltered area to prevent damage and prolong its life.
- Rust Prevention: Due to the steel frame, surface oxidation (rusting) can occur if the protective coating is scratched. Care should be taken during assembly and handling to prevent scratching the paint, thereby minimizing rust.
The manual emphasizes the brand's philosophy of drawing inspiration from Canadians and their lifestyle, aiming to provide products that help refresh spaces and reflect unique styles. It also encourages customer feedback and sharing photos using #mycanvasstyle. A toll-free number (1-888-670-6684) is provided for assistance with any issues or questions during assembly or use.
Need help?
General
To Next Page