BALA CORNER CHAIR 3
Parts List 4
Step-by-step Guide
6
7
Caring for Your Item 11
Warranty
TABLE OF CONTENTS
TOOLS REQUIRED
Please read and understand this entire manual before attempting to assemble,
operate, or install the product.
Any assembly or maintenance of the product must be carried out by adults only.
Some parts may contain sharp edges. Wear protective gloves if necessary.
To prevent damage, place all parts on a level surface during assembly. Add a
layer of protective surface if needed.
Due to the nature of steel, surface oxidation (rusting) will occur if this protective
coating is scratched. This is a natural process. To minimize this condition, it is
recommended that care be taken when assembling and handling the product in
order to prevent the paint from being scratched.
WARNING! TO REDUCE THE RISK OF SERIOUS INJURY,
READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE
ASSEMBLING AND U
SING THE PRODUCT.
2 people
Torque Wrench "D1 " + Hex Bit "D2 "
Hardware List
11
Maximum weight limit: 250 lb (113.3 kg) per chair.
D1
D2
To Next Page
Loading...
Need help?
General
