WHISTLER CONVERSATION SECTIONAL SET12
STEP 5
1. Place the table rim
6 on a soft, flat surface. Attach the
long table leg
7 to the table rim 6 by lining up the bolt
holes on the long table leg
7 with the corresponding bolt
holes on table rim
6. Using M6x20 combination bolt and
washer
C, lightly tighten the bolts using the hex key F. Do
not completely tighten until all assembly is completed.
7
F
X1
X1
6
C
X1
X4
G
FF
CC
F
F
C
6
7
NOTE:
Do not completely tighten.