User Manual
Page 83 of 95
Appendix F
REGARDING ELECTROMAGNETIC
COMPATIBILITY (CEM)
The equipments of the CAPENERGY product range: C400, C300, C200, C100, C50 and
C500, require special precautions regarding CEM and need to be installed an used
according to the CEM information provided in this user manual.
Guidance and manufacturer’s declaration – electromagnetic emissions
The equipments of the CAPENERGY product range: C400, C300, C200, C100, C50 and C500 are
intended for use in the electromagnetic environment specified below. The customer or the user the
CAPENERGY product range: C400, C300, C200, C100, C50 and C500 should assure that it is used
in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
GROUP 2 The equipments of the CAPENERGY product
range : C400, C300, C200, C100, C50 and
C500 must emit electromagnetic energy in order
to perform its intended function. Nearby
electronic equipment may be affected..
RF emissions
CISPR 11
Class A
Harmonic emission
IEC 61000-3-2
Class A
Voltage fluctuations/ flickers
emissions
IEC 61000-3-3
Complies
The equipments of the CAPENERGY product
range : C400, C300, C200, C100, C50 and
C500 is suitable for use in all establishments
other than domestic, and may be used in
domestic establishments and those directly
connected to the public low-voltage power
supply network that supplies buildings used for
domestic purposes, provided the following
warning is heeded:
Warning: This equipment/system is intended
for use by healthcare professionals only. This
equipment/ system may cause radio
interference or may disrupt the operation of
nearby equipment. It such as re-orienting or
relocating the equipments of the
CAPENERGY product range : C400, C300,
C200, C100, C50 and C500 or shielding the
location.
Table J-1. Electromagnetic emissions
To Next Page