Instruction manual CM46522 Please keep this instruction manual for future reference
CLEANING THE NOZZLES
Clean the nozzles on the milk container every time after heating milk or
making cappuccino. Otherwise, remains of milk may set hard.
1. Place a container under the milk dispenser pipe and press on the
CLEAN button (N3) on the milk container for at least 5 seconds.
The display shows “CLEANING!”
WARNING:
Risk of scalding from steam and hot water escaping from the milk
dispenser pipe
2. Remove the milk container and clean the nozzles on the appliance
with a damp cloth.
3. Put the hot water nozzle back in.
After you have nished cleaning, remove the milk container and place
it in the fridge, as the milk should not stay out of the fridge for longer
than 15 minutes. See “Cleaning the nozzles and the milk container” for
information on cleaning the milk container.
N3
N
To Next Page
Loading...
