Need help?Do you have a question about the Capricorn PN 8402 and is the answer not in the manual?
General| Brand | Capricorn |
|---|---|
| Model | PN 8402 |
| Category | Security System |
| Language | English |
Instructions for arming the system using single digit keys.
Instructions for arming the system using a user code.
Indicates trouble messages or alarm memory via tones.
How to clear low battery messages from transmitters.
Troubleshooting AC power loss indicated by 'E AC' message.
Troubleshooting fire protection issues indicated by 'F' messages.
Instructions for adding or changing a second user code.
How to turn the chime mode on or off for perimeter sensors.
Procedure for temporarily disabling specific system zones.
Steps to reset hardwire smoke detectors after an alarm or trouble.
Explains the status and meaning of the READY, AC POWER, AWAY, and STAY lights.
Details the meaning of various messages displayed in the keypad's windows.
Describes the function of specific keys for alarms, control, and system access.
Covers specific operations like chime mode, testing, bypassing, and user code management.
Procedure for silencing an alarm by entering a user code.
Explains indicators for AC power loss and backup battery status.
Details how the backup battery is tested and indicated.
Minimum steps for establishing a fire emergency evacuation plan.
Covers power, range, blocking, and environmental factors affecting RF devices.
Lists common reasons why a security system may not function as anticipated.
Explains various reasons why smoke detectors may fail to operate.
Provides measures to correct radio or television interference from the equipment.
Fields for recording essential emergency contact numbers.
Area to record the master and duress user codes and alarm settings.
Sections to log the locations of transmitters and hardwire zones.
Configuration for siren tones and alarm delay cut-off times.
To Next Page