Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
8. Additional pieces may be added and the display will show the
total number of pieces.
9. Press the NET/GROSS key to return to the weight display.
After the average piece weight has been set, pressing the
Fn/ key will go directly to displaying piece count.
To change the average piece weight, press the Fn/ key
a second time and the Add= 5 prompt will be displayed.
To quit the sampling process without changing the
average piece weight, set the sample size to 0 and press
the TARE key.
To Next Page
Loading...