Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
4. The display will alternate between showing the Gross
accumulator weight and the Gross accumulator count.
5. Press the TARE key and the Net accumulator weight will be
displayed, indicated by the alternating n and A.
6. After a brief interval, the display will show the number of Net
weight items accumulated, indicated by the alternating N and
C.
7. The display will alternate between showing the Net
accumulator weight and the Net accumulator count.
8. Press the TARE key to display the Gross accumulator
again.
9. Press the ZERO key to clear the displayed accumulator.
10. Press the NET/GROSS key to return to normal weight display.
To Next Page
Loading...