Cardinal 190 Series - Page 127

Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
Page 117
Scale Information Scroll Command
The wireless device sends:
<LF>N<CR>
The 190 will respond with the following (NOTE: the command must be
repeated for each response):
<LF>TYP:S<CR>
<LF>CAP:uuu:ccc:n:d<CR>
<LF>CMD:TMCIN<CR>
<LF>END:<CR>
The CAP response will be repeated once for each unit of measure.
uuu is the units of measure.
ccc the capacity for that unit of measure.
n is the least significant count by digit (e.g. 1, 2, 5, 10, 20,
...).
d is the decimal point position
(0=none, 1=xxxxx.x, 2=xxxx.xx, 3=xxx.xxx).
Invoke Scale Diagnostics Command
The wireless device sends:
<LF>D<CR>
The 190 will respond with diagnostic status:
<LF><r><e><c><m><CR>
where
<LF>
=
line feed (hex 0A)
<r>
=
space
<e>
=
space
<c>
=
‘C’ = calibration error
space = OK
<m>
=
space
<CR>
=
carriage return (hex 0D)