Cardinal 190 Series - Page 130

Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
Page 120
The printer prints
but does not use
the Print Tab
Settings or prints
a test ticket
The print tab setting or visual ticket format
must be selected prior to beginning the
weighing operation or just prior to printing the
ticket.
To select the ticket format prior to beginning
the weighing operation:
1. Press the Fn/ key then the PRINT
key. The display will change to the
“Prt=”.
2. Press the TARE  key to show the
current value.
3. If the value displayed is acceptable,
press the TARE  key again to save it.
4. If the displayed value is incorrect (or
another ticket format is desired), use
the Fn/ key to toggle to a new setting
and then press the TARE  key to
save it.
Allowable values for ticket formats are:
0 = print tab settings
1 = visual ticket format
NOTE: When a print format is selected, it
will remain active until changed by the
operator.