Cardinal 190 Series - Page 36

Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
Page 26
PUO= (Power-Up Zero Feature)
Press the TARE  key to show the current setting. If the setting
displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and then
press the TARE  key to save it.
PUO=yes
PUO=no
Automatic Re-Zero on
Power-Up
No Re-Zero on Power-
Up
td = (12 or 24 Time Format)
Press the TARE  key to show the current setting. If the setting
displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and then
press the TARE  key to save it. Note that in the 24 hour format,
12 is added to all times after noon, i.e. 3 PM would be 1500.
td=12
td=24
12 hour clock
(3PM displays 3:00)
24 hour clock
(3PM displays 15:00)