Cardinal 190 Series - Page 37

Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
Page 27
d in= X,Y (Digital Input)
Press the TARE  key to show the current setting. If the setting displayed
is acceptable, press the TARE  key again to save it. Otherwise, use the
Fn/ key to select the X, Y settings for the Digital Input, and then press
the TARE  key to save it.
where:
X = Input transition which activates selected keypad function
(0=open to closed, 1=closed to open)
Y = Keypad function which will be performed
0 =
Digital Input is disabled
1 =
ZERO key function is performed when input goes from
open to closed
2 =
PRINT key function is performed when input goes from
open to closed
3 =
TARE key function is performed when input goes from
open to closed
4 =
NET/GROSS key function is performed when input
goes from open to closed
11 =
ZERO key function is performed when input goes from
closed to open
12 =
PRINT key function is performed when input goes from
closed to open
13 =
TARE key function is performed when input goes from
closed to open
14 =
NET/GROSS key function is performed when input
goes from closed to open