Cardinal 190 Series - Page 65

Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
Page 55
4.8.2 Cardinal Scoreboard Continuous Output Format
If Cardinal Scoreboard is selected, the data will be transmitted in the
following format:
<s><xxxxxx><d><uu><m><cc><cr>
Where:
s =
Sign
"-" = negative, " " (blank) = positive
xxxxxx =
Weight
Six digits
d =
Decimal point
Added to string if enabled in setup
uu =
Units
LB, OZ, KG, G
m =
Mode
G = Gross, N = Net
cc =
Weight Status
OC = overcapacity
CZ = center of zero
MO = motion
EE = weight not currently being displayed
cr =
Carriage Return
(hex 0D)
4.8.3 Weight On Demand
If continuous output has not been selected for Serial Port 1 (Cont1=NO),
the 190 indicator will respond to a weight request (ENQ).
The host device (computer) sends:
ENQ - (hex 05)
The 190 will respond:
<s><xxxxxx><d><uu><m><cc><cr>
Where:
s =
Sign
"-" = negative, " " (blank) = positive
xxxxxx =
Weight
Six digits
d =
Decimal point
Added to string if enabled in setup
uu =
Units
LB, OZ, KG, G
m =
Mode
G = Gross, N = Net
cc =
Weight Status
OC = overcapacity
CZ = center of zero
MO = motion
EE = weight not currently being displayed
cr =
Carriage Return
(hex 0D)